Fundamental Of Safety Engineering
Last updated 3/2022
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 672.89 MB | Duration: 1h 37m

Loss prevention for Hazardous Industries
What you'll learn
Safety Concept
Active & Passive Fire protection
Fire & Gas detection
Layout main principles
Hazardous area classification
Open & Closed drain system
Requirements
No programing is required. You learn the fundamental of safety engineering
Description
The purpose of this E-Course is to describe the systems, equipment necessary to protect against the major hazards which could lead to injury to personnel, damage to facilities, loss of production or pollution of the environment, and to prescribe the safety measures which are adopted in the design in order to:Avoid exposure to potential hazards,Minimize / control the risk of ignition,Contain and minimize the consequence (fire, explosion and pollution) of the hazards and ensure adequate emergency response facilities are provided,Provide means of escape and evacuation from such hazards,Ensure the installation is designed to a safe standard for all foreseeable hazards,Provide a safe working environment for personnel,Ensure that the environment is adequately protected from harm.The different levels of protection are defined as follows:Primary Protection – Detection, alarm and control of potential process hazards shall be achieved by the process control systems.Secondary Protection – Additional protection provided shall be independent of the primary protection system and may typically include protection against overpressure by PSV's.Emergency Protection Systems – Fire and gas detection, emergency shutdown and emergency depressurisation systems are designed to bring under control hazards in case the process control system has failed to detect or prevent such situation.
Overview
Section 1: Introduction
Lecture 1 SAFETY CONCEPT
Section 2: LAYOUT PHILOSOPHY & MAIN PRINCIPLES
Lecture 2 Fire Zones, Restricted Area, Impacted Area and ESDV location
Section 3: HAZARDOUS AREA
Lecture 3 HAZARDOUS AREA CLASSIFICATION
Section 4: FIRE & GAS DETECTION
Lecture 4 Fire & Gas Detection System
Section 5: FIRE WATER SYSTEM
Lecture 5 Fire Water Ring Main & Deluge System
Section 6: PASSIVE FIRE PROTECTION
Lecture 6 PFP Requirement
Section 7: DRAINAGE PHILOSOPHY
Lecture 7 OPEN AND CLOSED DRAINAGE SYSTEM
Safety Engineers, Process safety Engineers, Plant managers, Safety supervisors, Process Engineers, and discipline Engineers.
Screenshots